Tips for Installing a Brick Paver Walkway

Brick pavers

Installing a Bolton ma brick paver walkway is one of the best outdoor projects for your home. Not only
will this improve the curb appeal, but it will also go a long way in increasing the value of your
property. Unfortunately, this job is not as simple as it sounds. Although this is a do-it-yourself
job for many, others find it to be too much work.

Tip: if you are not confident in your ability to install a brick paver walkway with success, you
should opt for hiring a professional masonry contractor. This is often times the best way of
knowing that the job will be done right the first time around.

For some homeowners, the most difficult part of installing a brick paver walkway is the actual
planning process. There is a lot that goes into this, despite the fact that it often times appears
simple enough on the surface.

Tips for Getting Started

No matter if you have installed a brick paver walkway in the past or are taking on this job for the
first time, there are some tips that can keep you on the right path from start to finish.

Have a Plan

Before you do anything, you must plan out the path of your new brick paver walkway. Where do
you want it to be located? Are you sure that it will work in the area that you have chosen? Don’t
be afraid to experiment with multiple ideas before you begin to dig.

During this phase of the project, you can use string to show the edges of the walkway. While the
pavers will not be in place just yet, it will give you a better idea of what to expect.

Lay the Pavers First

Some people like to prepare the ground before they purchase their pavers. While there is nothing
wrong with this, you may want to buy your bricks first and then move on from there.

Once you have your bricks at home, you can lay them on the ground before it is prepared. This
step is not mandatory, but it can go a long way in ensuring that you put your pavers exactly
where you want them.

Get Your Supplies and Equipment Together

There is nothing worse than starting a project, just to find that you have to stop to purchase more
supplies or pick up equipment.

To ensure that you are moving forward quickly and efficiently, you should lay out all your
supplies and equipment before starting. This includes pavers, string, sand, and gravel as well as a
brick cutting saw and tamper.

Note: if you find that you are missing something along the way, it is better to stop and get it than

to move on without it and hope for the best.

Don’t Rush

This is one of the biggest mistakes you can make as a do-it-yourselfer. Some people are so
excited to see the completed job that they rush through it from beginning to end. Rather than
make this mistake, block out enough time in your schedule to ensure that you get everything
done the right way the first time around.

When you rush, there is a better chance of making a mistake. And when you make a mistake,
you will end up costing yourself more time in the long run.

Finish the Job the Right Way

Time and time again, people make the same mistake when installing a Lancaster ma brick paver walkway.
They get the pavers in place and think they are done with the job. Unfortunately, they don’t
finish things off the right way and it ends up costing them in the end.

Once your pavers are in place, you must go over the entire job with sand to ensure that it is
packed into the joints. Along with this, you may want to add top soil around the edges of the
walkway to hold it in place.

Soon enough, your new walkway is going to be hit with rain. Immediately following, make sure
you take a close look at the joints. There is a good chance that some of the sand washed away
– this is common. All you have to do is add more sand. You may have to do this after the first
couple rains.

Hire a Professional

If you are worried about your capabilities or don’t have the time to install a brick paver walkway
on your own, don’t be shy about contacting a professional Massachusetts brick walkway contractor . This is the best way to ensure that the
project is completed the right way. Sure, you are going to pay for labor but you can be confident
that the end result will look good and that you have a walkway that will last a very long time.

With these tips in mind, you should have a much easier time installing a brick paver walkway.
Soon enough, the job will be complete and your home will be more stylish!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s